Pipe Clamp – Professional Manufacturer

Short Description:

Assembly on the welding plate Before assembly, for better orientation of the clamps, it is recommended to mark the fixing place first, then weld on the welding, insert the lower half of the tube clamp body and put on the tube to be fixed. Then put on the other half of the tube clamp body and the cover plate and tighten with screws. Never weld directly to the base plate where the pipe clamps have been fitted.

Send email to us

Product Detail

Product Tags

It is a part directly in contact with the pipeline, which can realize different functions such as support, suspension, limit, guide and fixation, and control the vibration of the pipeline. Meet the pipe diameter (OD) 17mm ~ 1219mm, adapt to the temperature -40℃ ~ +700℃.

The structure form of the pipe clamp should be determined according to the different functions of the pipe clamp needs to be achieved, and the special can be made according to the requirements of non-standard design.
product (1)

For stacked assembly, the rails can be welded to the base or fixed with screws. First install the upper and lower half of the pipe clamp body, put on the pipe to be fixed and then put on the upper half of the pipe clamp body, fix it with screws and prevent it from turning by means of the anti-loosening cover plate. Then install the second pipe clamp, the same method as above.
Assembly of the bend , assembly of the bend should be fixed directly in front and behind the bend with the Yongsheng pipe clamps. It is recommended that such a support point should be a fixed position.

Production Cost Advantage

The company's own factory, can high quality and rapid production, to ensure the quality and quantity of products, can be delivered on time according to customer demand.

Product Technology Advantage

We have a professional technical team, all of whom have many years of experience in the industry. We have the technical strength and the ability to research and develop new products.